Skip to main content

Kitchen Exhaust cleansing – Our techniques


there may be a way to cleaning kitchen exhaust structures. there’s a right way and a incorrect way to offer this provider. i can cross over right here how I sense the proper manner is to smooth a hood system. the first step is the set up. All items are moved off the cooking device. Then the pilots are blown out. Plastic sheeting is draped over the equipment or a funnel installation is made to have all of the water fall right into a barrel. note every device can be installation with a funnel.

once the cooking equipment is protected properly. Now we incorporate the area we drape plastic from as high of a factor as possible hopefully the Industrial air cooler ceiling down to three inches above the ground in the front of the cooking equipment. This prevents any again splashes of water from contaminating your kitchen.

the next step is to cast off the grease filters from your kitchen exhaust system and area them where ever we’re going to be cleaning them. If viable soaking them in a chemical method to help the cleaning of them while we get to that stage.

Now that we’re set up we check for panels. If there are any panels we open them and scrape out any heave grease. We additionally try this to the hood itself as properly.

Now it is time to go to in which the fan is positioned normally at the roof but there are in many instances the fan is placed on the aspect of your constructing. One man remains at the hood at this factor armed with a store vac geared up to suck up the water. We then turn the fan in a way to expose the duct work and the fan blades you need to observe it’s far code that each fan has a hinge hook set up particularly for this reason.

as soon as the fan is flipped the action starts. The ductwork and fan blades is degreased and electricity washed. Then the fan is placed returned. The inner a part of the pinnacle of the fan is now degrease and electricity washed. All this takes place whilst water is falling down your ductwork at a charge of between 2 to 5 gallons of water in step with minute relying at the gadget getting used. the man on the floor internal your kitchen is looked after that because it falls. Teamwork is crucial on this paintings!

as soon as the fan and duct had been cleaned nicely it’s time to move on to the kitchen hood. We pass our gadget and our selves to the ground then we degrease and strength wash the hood as vital to make it clean. every now and then scrubbing with metallic wool and scraping with stiff heavy metal scrapers is required.

once the hood is clean one man dries the water from the hood with a towel and shines the hood with metal shiner whilst the other guy goes to attack the filters. The filters are degreased and power washed the again aspect first then the front. when that is all achieved we positioned the filters back for your bright clean kitchen exhaust machine smooth up all the mess, collect fee and depart as determined.

Leave a Reply

Your email address will not be published.